JBL Control 25AV-WH 5.25″ 2-Way 200W Shielded Indoor/Outdoor Loudspeaker (Pair, White)


JBL Control 25AV-WH 5.25″ 2-Way 200W Shielded Indoor/Outdoor Loudspeaker (Pair, White)


Sold as a pair, the white JBL Control 25AV-WH is a passive 5.25″ shielded loudspeaker with a low-saturation transformer designed for voice amplification and foreground music reproduction in a variety of indoor and outdoor venues. The 60W transformer allows the Control 25AV-WH to be driven by 70V, 100V, or 8-Ohm power amplifiers (available separately). Each Control 25AV-WH is equipped with a durable 5.25″ woofer and a 0.75″ titanium-coated tweeter, yielding a frequency range of 70 Hz to 23 kHz, and a continuous program power capacity of 200W.

The 12 dB/octave crossover network ensures proper frequency distribution to the speaker components as well as smooth tone. SonicGuard circuitry protects against damage incurred through overloading without compromising sound quality. The screw-down terminal strip enables simple wiring, and utilizes nickel/zinc terminals for enhanced resistance to rust. The supplied InvisiBall mounting systems and input panel covers contribute to ease of installation.

High-impact polystyrene enclosures with magnetic shielding for use near video monitors
Included InvisiBall mounting systems are simple to install, aim easily, and provide a high degree of theft deterrence
100° x 100° high-frequency horn
Low-saturation 60W transformer enables use with 70V/100V constant-voltage systems, and offers a bypass position for use in an 8-Ohm setup
200W continuous program power handling
Durable 5.25″ polypropylene-coated woofer with WeatherEdge surround
0.75″ titanium-coated, horn-loaded tweeter
70 Hz to 23 kHz frequency range (-10 dB)
12 dB/octave crossover network with high- and low-pass filtering
Screw-down terminal strip—with zinc-plated copper base and nickel-plated metal screws/washers—accepts up to 9mm outside and 4mm inside open lug (#6, #8 or #10), plus bare wire (up to 12 AWG)
Aurally transparent SonicGuard circuitry features full-range power limiting to protect network and transducers, plus an internal fuse to protect during exceptional overload conditions
 UPC: 050036903318
Categories: ,
Active or Passive Passive
LF Driver 5.25″ / 13.5 cm polypropylene-coated paper woofer with WeatherEdge butyl rubber surround and 1″ / 2.5 cm voice coil on kapton former
HF Driver 0.75″ / 2 cm titanium-coated PEI tweeter
Frequency Range 70 Hz to 23 kHz (-10 dB)
Midrange 130 Hz to 14 kHz (± 1.5 dB, typical)
Coverage Area 100° x 100° (nominal)
Directivity Factor 4.9 (averaged 500 Hz to 4 kHz)
Directivity Index 6.9 dB (averaged 500 Hz to 4 kHz)
Power Capacity Continuous Program Power: 200 W (for 100 hours)
Continuous Pink Noise: 100 W (for 100 hours)
Nominal Sensitivity 87 dB SPL (1 W at 1 m)
Maximum SPL Continuous Peak Pink Noise: 113 dB
Continuous Average Pink Noise: 107 dB
Continuous Average Music/Speech: 103 dB
Nominal Impedance Thru Position: 8 Ohms
Minimum Impedance 6.7 Ohms at 230 Hz
Transformer Taps Watts at 70 V: 7.5, 15, 30, 60
Watts at 100 V: 15, 30, 60
Thru Position: 8 Ohms nominal
Crossover Low-Pass Filter: 2nd order (12 dB/octave)
High-Pass Filter: 2nd order (12 dB/octave)
Input Screw-down terminal strip
Maximum Wire Gauge 12 AWG
Shielded Yes
Overload Protection Full-range power limiting
Internal fuse
Environmental Exceeds MIL-STD-810 for humidity, salt spray, temperature, and UV
IEC 529 IPX4 splashproof rating
Construction Material Enclosure: High-impact polystyrene
Grille: Stainless steel (white, paintable)
Rotation Against Wall on InvisiBall Base: 37° x 44° (V x H)
On Bracket: 44° in all directions
Dimensions (H x W x D) 9.3 x 7.4 x 6.3″ / 23.6 x 18.6 x 15.9 cm
Weight 9 lb / 4 kg
Safety Rating UL 1876
Packaging Info
Package Weight 20.75 lb
Box Dimensions (LxWxH) 15.4 x 10.5 x 9.6″

Based on 0 reviews

0.0 overall

Be the first to review “JBL Control 25AV-WH 5.25″ 2-Way 200W Shielded Indoor/Outdoor Loudspeaker (Pair, White)”

There are no reviews yet.